AED Cuer2 Dual Mode

Print
Priced From:R 34204,90
Description

PARAMEDIC SERIES AED

 

AUTOMATED/MANUAL DEFIBRILLATOR - CU-ER2

FEATURES:

- Two Functions:  Manual Mode – 12 steps escalating & AED Mode – 150J into a 50Ω load.

- Automatic analysis of patient ECG

- User guide with text and voice prompts.

- 320 X 240 graphic LCD display.

- Versatile Power Supply, rechargeable battery pack and AC adapter standard.

- Car cigar lighter jack power cord and disposable battery pack optional.

- Battery has capacity of 200 shocks when fully charged.

- Rescue data collected is stored in internal flash memory.

- Rescue data can be downloaded for review, archiving and printing.

- Automatic self tests, prompts and alarms given if device fails self tests.

Specifications:

MODEL

CU-ER2

ECG Monitor

- Patient connection: Defibrillation Pads, ECG Electrodes.

- Bandwidth: Monitoring Mode: 0.3 to 40Hz (-3dB) EMS Mode – 1~30Hz

- ECG size: 5,10, 20mm/mV display on monitor ( Auto scaling)

- Heart rate: Digital 30 to 300 bpm (±2%)

Defibrillator

- Operation mode: Manual / Semi automatic

- Waveform: e-cube biphasic (BTE type)

- Energy:  - Manual mode: Variable energy levels selection (12 steps escalating)

                   (2, 3, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200)J  - AED mode: 150J into a 50Ω load

- Synchronous Cardio version: Energy deliver begins within 60ms of the QRS peak

- Charging time: Less than 10 seconds

- Controls: - Manual mode: CHARGE, SYNC (R-wave), DISARM

                  - AED mode: ANALYZE, PAUSE

- Detection Level: > 0.1mV ECG

- Defibrillation Electrodes: Multifunction electrodes (Disposable)

 Adult adhesive pads (pre-gelled)

Voice and Text Prompts

- Voice and text prompts guide the user through the protocol

- All the user interfaces are supported in local language for easy use.

Data Storage & Management

- Internal flash memory: 12 hours of event and ECG recording

- Smart Media Card (32M): 42 hours of event and ECG recording or 1 hour if voice recording is enabled.

- Multi patient data recording - review the patient’s ECG, Incident details and the device information - Transmit multi patient data to PC

Automated Self-Test

- Power On Self-Test / Run Time Self-Test / Manual Test

- Periodic Self-Tests (daily / weekly / monthly)

Display

- Screen Type: High resolution display (graphic LCD) - Screen size: 4 inches diagonal, 320x240 pixels - Sweep speed: 25mm/sec, nominal - Viewing time: 3.2 seconds

Physical

- Size: 305mm x 250mm x 95mm (L x W x H)

- Weight: Approximately 2.8Kg - Patient Isolation: Type BF

AC Adaptor

- Input: 100 ~ 240V AC 50/60Hz 1.2A - Output: + 12VDC, 3.5A

Battery Pack

- 12V Nickel-Metal Hydride battery pack (rechargeable) - Charging time: Minimum of 4 hours for full charging - Capacity: when new, minimum of 200 shocks deliveries (fully charged)

External Link

- UART port - IrDA port

Package Contents

- Device, 1 Sets of pads, 1 Power Cord, 1 AC Adapter, 1 Long Life NI-MH battery, 1 Operator’s Manual, 1 Quick Reference Card, Carrying Case

Optional Accessories

- Car Cigar Lighter Jack Power Cord

- SmartMedia Card (32M)

- External Thermal Printer (wire) and paper

- UART Cable / ECG Cable (3 lead) / ECG Electrodes.

- Data management software(CU-EX1) for multi patient

- Lithium Battery (disposable)